Toggle Wings

Spring Wing Toggle Heads
The Standard Wing Toggle anchor is a two-part hollow wall anchor consisting of a machine bolt and a spring wing toggle. The snap-open action eases installation and spreads the working load over a greater surface area. They are designed for use in wallboard/drywall, block and other hollow base materials.

pdf-tech.jpgTechnical Data PDF

Installation Instructions:
  1. Drill appropriate size hole.
  2. Insert bolt through the fixture and thread into the wing.
  3. Push toggle wing through the drilled hole and fasten tight.
  • 1/8 (6-32) Toggle Wings | The Nutty Company, Inc.

    1/8 (6-32) Toggle Wings

    SKU: TW18

    $0.162
    each

    Bulk Pricing Available

  • 3/16 (10-24) Toggle Wings | The Nutty Company, Inc.

    3/16 (10-24) Toggle Wings

    SKU: TW316

    $0.219
    each

    Bulk Pricing Available

  • 1/4 (1/4-20) Toggle Wings | The Nutty Company, Inc.

    1/4 (1/4-20) Toggle Wings

    SKU: TW14

    $0.306
    each

    Bulk Pricing Available

  • 5/16 (5/16-18) Toggle Wings | The Nutty Company, Inc.

    5/16 (5/16-18) Toggle Wings

    SKU: TW516

    $0.624
    each

    Bulk Pricing Available

  • 3/8 (3/8-16) Toggle Wings | The Nutty Company, Inc.

    3/8 (3/8-16) Toggle Wings

    SKU: TW38

    $0.756
    each

    Bulk Pricing Available

  • 1/2 (1/2-13) Toggle Wings | The Nutty Company, Inc.

    1/2 (1/2-13) Toggle Wings

    SKU: TW12

    $2.010
    each

    Bulk Pricing Available